Network; General - EverFocus VANGUARD 16x8H Plus User Manual

H.265 VANGUARD 16x8H Plus

5.3.6 Network

You can configure the network settings on this page.

5.3.6.1 General

This page allows you to configure network parameters.
5.3.6.1.1 General
You can configure Static IP or DHCP network on this page.
DHCP: Switch the button to the right to enable DHCP function. The router will automatically
assign all the below IP parameters to the DVR. If you want to configure a Static IP, switch the
button to the left to disable the DHCP function and then input a static IP address and related
network settings below.
IP Address: The IP address of the DVR. The IP address consists of four groups of numbers,
separated by periods. For example, "192.168.001.100".
Subnet Mask: Subnet mask is a network parameter which defines a range of IP addresses that
can be used on a network. The subnet address also consists of four groups of numbers,
separated by periods. For example, "255.255.000.000".
Gateway: This address allows the DVR to access the Internet. The format of the Gateway
address is the same as the IP Address. For example, "192.168.001.001".
DNS: DNS1 is the primary DNS server and DNS2 is a backup DNS server. Usually, it's enough to
just enter the DNS1 server address.
Click Save to save the settings or Refresh to refresh the page.
204