I/O Control - EverFocus ECOR Series Instruction Manual

( ; (
Figure 5.27 is a screen shot of the I/O Control Setting Menu. This menu is to define the settings for
controlling the DVR through RS232 or RS485.
-.-
<
There are eight different speeds: 1200, 2400, 4800, 9600, 19200, 38400, 57600 and 115200 BPS.
/01
D
/01
ID numbers. It is selectable from 0 to127.
<
There are eight different speeds, 1200, 2400, 4800, 9600, 19200, 38400, 57600 and 115200 BPS.
Downloaded from www.Manualslib.com
*
6 The speed used to transmit instruction or information through the RS232 port on the DVR.
< 6 The data bit used for transferring. There are two options: 8 or 7.
< 6 This field is to set the stop bit for the RS232 connection. There are two options: 1 or 2.
6 This selects the level at which you will be connected. There are three options: None, Odd, or Even.
6 Select PTZ protocol from Transparent, Pelco D, Pelco P, Everfocus, or Samsung.
6 If more than one DVR is used through the RS485 connection, this can be used to assign different
6 The speed used to transmit instruction or information through the RS485 port on the DVR.
< 6 The data bit used for transferring. There are two options: 8 or 7.
< 6 This field is to set the stop bit for the RS485 connection. There are two options: 1 or 2.
6 This selects the level at which you will be connected. There are three options: None, Odd, or Even.
manuals search engine
Figure 5.27 (System Menu – I/O Control)
58