Motion - EverFocus VANGUARD 16x8H Plus User Manual

5.3.3.5 Motion

You can configure the motion settings and motion event notifications on this page. You can also
enable the Push Notification function to send motion event alerts to your mobile devices (with
eFVMS App installed). For more details on Push Notification, please refer to Appendix B: Push
Notification.
To configure the Motion Detection settings:
1. Select a channel from the Channel drop-down list.
2. Switch the Enable button to the right to enable the motion detection function.
3. Select a motion detection sensitivity level from the Sensitivity drop-down list. The higher the
value the higher the sensitivity.
4. On the right-side image, the red blocks represents the areas are applied with the motion
detection function. You can click the mouse and drag it to draw multiple areas. To clear a
certain area, use the same method to draw on the same area again, the motion area will be
erased. By default, the whole areas are marked in red.
5. Click the Save button to save the settings.
6. To further set up the motion event notifications, enter the Motion alarm setup page (please
refer to 5.3.5.1 Motion).
7. To further set up the motion recording function, enter the Record Schedule setup page
(please refer to 4.3.4.2.2 Record Schedule).
Click Save to save the settings or Refresh to refresh the page.
Click the Copy button to display the channel options. Select the channels and then click the
Copy button to copy the same configurations from this channel to the selected channels.
H.265 VANGUARD 16x8H Plus
165