Set Clientsta Authentication; Set Clientsta Data-Encryption-Option - Alvarion BreezeACCESS-EZ Manual

Chapter 5 - Command Line Interface
5.9.1

set ClientSta authentication

This command defines the 802.11 authentication type allowed by the SU-A-EZ.
Syntax
set ClientSta authentication <OpenSystem | SharedKey>
• OpenSystem - Can associate to an AU-EZ without verifying its identity using a shared
key. "Open" authentication means either there is no encryption (if encryption is
disabled) or WEP-only encryption is used (if encryption is enabled).
• SharedKey - Authentication is based on a shared key that has been distributed to all
stations.
Default Setting
OpenSystem
Command Mode
Installer, Admin
Example
Installer# set ClientSta authentication SharedKey
Installer#
5.9.2

set ClientSta data-encryption-option

This command enables or disables the SU-A-EZ to use data encryption (WEP). If
this option is selected when using static WEP keys, you must configure at least
one key on the SU-A-EZ.
Syntax
set ClientSta data-encryption-option <yes | no>
• yes - Enables data encryption.
• no - Disables data encryption.
Default Setting
Disabled
Command Mode
Installer, Admin
Example
Installer# set ClientSta data-encryption-option yes
Installer#
84 Operation