Table of Contents
Advertisement
Chapter 3 - Base Station ManagementUsing the Web-Based Element Management System
Chapter 3 - Base Station Management
3.1
Using the Web-Based Element Management
System
This section includes:
Accessing the Element Management System
Using the Element Management System
3.1.1
Accessing the Element Management System
To access the web-based Element Management System (EMS), follow these steps:
1
Open a web browser and connect to the following URL: http://<base_station_IP_address>.
The default method of setting the unit's IP parameters is DHCP client, meaning that IP parameters
NOTE!
should be obtained automatically from a DHCP server. When IP parameters are obtained from a DHCP
server, the details of the management interface IP parameters should be provided by the system
administrator (based on the MAC address of the unit, which is printed on the unit's label). If a DHCP
server is not available, the unit will use the fallback parameters configured for the management
interface (See
mask of 255.255.255.0). In this case, if static IP parameters should be used, connect directly to the unit
using the default fallback address and configure the appropriate management interface parameters.
2
The log in window is displayed:
3
Enter the Username and Password (the default Username/Password are admin/admin).
NOTE!
To clear the Username/Password fields click on the Reset button.
4
Click on the Login button. The Status Overview page of the management utility is displayed.
WBSn-2400 and WBSn-2450 System Manual
"Fallback IP" on page
69. The default fallback IP address is 192.168.1.1 with a subnet
Figure 3-1: Login Window
Using the Web-Based Element Management System
21
Advertisement
Table of Contents
