Table of Contents
Advertisement
Software settings
17
17.1 Basic settings for new programs
Parameter
Stitch length
Thread Tension at Needle
Thread Tension at Hook
Fullness Top/Bottom
Fullness
Additional Fullness
Stitch Condensing at Start
Seam Gender
Grading Factor
Teach Side (R/L)
17.2 Basic settings, machine
Stitch Condensing at Start - Stitch condensing at start of seam
Parameter
Number Stitch Condensing
Stich Condensing Factor
Speed
Stitch Condensing at End - Stitch condensing at the end of the seam
Parameter
Number Stitch Condensing
Stich Condensing Factor
Speed
Service Instructions 610/630 - 00.0 - 10/2014
Software settings
Meaning
Stitch length in mm: 1-4
Needle thread tension in percent: 1-99
Looper thread tension in percent: 1-99
Fullness setting of top feed/bottom feed:
• 1: Top feed
• 2: Bottom feed
• 3: Top feed and bottom feed
Fullness factor: 1-16
Correction of the differential bottom feed to the differential
top feed for fullness
Stitch condensing at the start of the seam:
• 0: off
• 1: on
Symbolic seam representation for work step
• 0: Free sewing
• 1: Sleeve crown
• 2: Front armhole
• 3: Rear armhole
Grading factor in percent, growth from variable to variable
Specimen part, right/left side
Meaning
Stitch number of stitch condensing: 1-50 stitches
Stitch length of condensing in relation to the set stitch
length
Speed during stitch condensing: 50 - 200 rpm
Meaning
Stitch number of stitch condensing: 1-50 stitches
Stitch length of condensing in relation to the set stitch
length
Speed during stitch condensing: 50 - 200 rpm
79
Advertisement
Table of Contents
