Error Messages; Status Messages - MUTOH DrafStation User Manual

7.2 ERROR MESSAGES

7.2.1 Status messages

This section describes the display during the plotter operation.
When the product is operating correctly, the operation panel displays each operation status as below.
N° Possible cause
1 Ready to Plot Idling (Media is set).
2 Paper End Idling (Media is not set).
3 Receiving [port*] Receiving data. (* displays a port no.)
4 Converting [port*] Analyzing data. (* displays a port no.)
5 Plotting Printing.
Cleaning **
6 Cleaning the head. Please wait a while.
minutes
7 Ink Refill **min Filling the ink. Please wait a while.
8 Transport Mode Preparing for transportation. Please wait a while.
9 ******** OK? Initializing the media.
Please wait a while.
10 Paper Initial
(*** represents the setup media type.)
11 Cover Open The front cover is open.
12 Lever Up The media hold lever is positioned backward. Set the media.
After receiving print data, the plotter is waiting for receiving the
13 Layout Receiving next data.
Displayed when the layout function is enabled.
Be sure to read and understand the safety warnings before handling the printer.
User's Guide DrafStation and Drafstation Pro
Description
134
Chapter 7: Troubleshooting
Reference
--
"Media handling"
--
--
--
"Head cleaning"
"Installing ink
cartridges"
"Transporting the
plotter"
"Setting media type"
"Media handling"
"Media handling"
"Setup menu items"
AP-75730, Rev. 2.1, 19/01/2009