Introduction To The Manual; Contents Of This Chapter; Applicability; Safety Instructions - ABB ACQ80-04 Firmware Manual

Introduction to the manual

Contents of this chapter

The chapter describes applicability, target audience and purpose of this manual. It
also describes the contents of this manual and refers to a list of related manuals for
more information.

Applicability

The manual applies to the ACQ80 primary control program (version 2.07.0.3).
To check the firmware version of the control program in use, see system information
parameter 07.05 Firmware version

Safety instructions

Follow all safety instructions.
• Read the complete safety instructions in the hardware manual of the drive
before you install, commission, or use the drive.
• Read the firmware function-specific warnings and notes before changing
parameter values. These warnings and notes are included in the parameter
descriptions presented in chapter

Target audience

The reader is expected to know the fundamentals of electricity, wiring, electrical
components and electrical schematic symbols.
The manual is written for readers worldwide. Both SI and imperial units are shown.
Special US instructions for installations in the United States are given.
(see page 77) on the control panel.
Parameters on page 63.
Introduction to the manual 11
1