Control And Status Words - ABB ACQ80-04 Firmware Manual

74 Parameters
No. Name/Value
05.86 DI delayed status at
fault
0b0000...0b1111
05.87 Inverter
temperature at fault
-40...160°C
05.88 Reference used at
fault
06
06 Control and status
words
06.01 Main control word
0x0000...0xffff
Description
Displays the DI delayed status (10.02) at which fault
occurred. For the bit list, see parameter
status.
DI delayed status at fault.
Displays the inverter temperature (05.11) at which fault
occurred.
Inverter temperature at fault.
Displays the reference used (28.01/23.01) at which fault
occurred. The type of the reference depends on the selected
operation mode (79.10).
Drive control and status words.
The main control word of the drive. This parameter shows the
control signals as received from the selected sources (such
as digital inputs, the fieldbus interfaces and the application
program).
For the bit descriptions see page 253. The related status
word and state diagram are presented on pages
respectively.
This parameter is read-only.
Bit Name
0 Off1 control
1 Off2 control
2 Off3 control
3 Run
4 Ramp out zero
5 Ramp hold
6 Ramp in zero
7 Reset
8 Inching 1
9 Inching 2
10 Remote cmd
11 Ext ctrl loc
12 User bit 0
13 User bit 1
14 User bit 2
15 User bit 3
Main control word.
Def/FbEq16
0b0000
10.02 DI delayed
1 = 1
-
1 = 1°C
-
0x0000
255 and 256
1 = 1