Chapter 2 Command System
:CURSor Commands
The :CURSor commands are used to measure the X-axis value (such as time) and Y-axis value (such as
voltage) of the waveform displayed on the screen.
Command List:
:CURSor:MODE
:CURSor:MANual
:CURSor:TRACk
:CURSor:AUTO:ITEM
:CURSor:XY
:CURSor:MODE
Syntax
:CURSor:MODE <mode>
:CURSor:MODE?
Description
Set or query the cursor measurement mode.
Parameter
Name
<mode>
Explanation
horizontal timebase mode is XY.
Return
The query returns OFF, MAN, TRAC, AUTO or XY.
Format
Example
:CURSor:MODE MANual
Related
:CURSor:MANual
Commands
:CURSor:TRACk
:CURSor:XY
:TIMebase:MODE
DS1000Z Programming Guide
Type
Discrete
OFF: disable the cursor measurement function.
MANual: enable the manual cursor measurement mode.
TRACk: enable the track cursor measurement mode.
AUTO: enable the auto cursor measurement mode.
XY: enable the XY cursor measurement mode. This mode is valid only when the
Range
{OFF|MANual|TRACk|AUTO|XY}
/*Enable the manual cursor measurement mode*/
RIGOL
Default
OFF
2-15