Mask Commands; Mask:enable - Rigol DS1000Z Series Programming Manual

RIGOL

:MASK Commands

The :MASK commands are used to set and query the pass/fail test parameters.
Command List:

:MASK:ENABle


:MASK:SOURce

:MASK:OPERate

:MASK:MDISplay

:MASK:SOOutput

:MASK:OUTPut

:MASK:X

:MASK:Y

:MASK:CREate

:MASK:PASSed?

:MASK:FAILed?

:MASK:TOTal?

:MASK:RESet

:MASK:ENABle
Syntax :MASK:ENABle <bool>
:MASK:ENABle?
Description
Enable or disable the pass/fail test or query the status of the past/fail test.
Parameter
Name
<bool>
Explanation
The pass/fail test is invalid in the following conditions: the horizontal timebase is XY or
ROLL, in the slow sweep mode (namely when the horizontal timebase is YT, the horizontal
timebase is set to 200ms/div or slower) as well as during waveform record.
Return The query returns 0 or 1.
Format
Example :MASK:ENABle ON
2-46
Type Range
Bool {{0|OFF}|{1|ON}}
Chapter 2 Command System
Default
0|OFF
DS1000Z Programming Guide