Trigger:pulse - Rigol DS1000Z Series Programming Manual

RIGOL

:TRIGger:PULSe

Command List:
:TRIGger:PULSe:SOURce

:TRIGger:PULSe:WHEN

:TRIGger:PULSe:WIDTh

:TRIGger:PULSe:UWIDth

:TRIGger:PULSe:LWIDth

:TRIGger:PULSe:LEVel

:TRIGger:PULSe:SOURce
Syntax
:TRIGger:PULSe:SOURce <source>
:TRIGger:PULSe:SOURce?
Description Set or query the trigger source in pulse width trigger.
Parameter
Name
<source>
Return
The query returns CHAN1, CHAN2, CHAN3 or CHAN4.
Format
Example
:TRIGger:PULSe:SOURce CHANnel1
:TRIGger:PULSe:WHEN
Syntax
:TRIGger:PULSe:WHEN <when>
:TRIGger:PULSe:WHEN?
Description Set or query the trigger condition in pulse width trigger.
Parameter
Name
<when>
Explanation PGReater/PLESs: you need to specify a pulse width (refer

to :TRIGger:PULSe:WIDTh). The oscilloscope triggers when the positive pulse width
of the input signal is greater/lower than the specified Pulse Width.
NGReater/NLESs: you need to specify a pulse width (refer

to :TRIGger:PULSe:WIDTh). The oscilloscope triggers when the negative pulse width
of the input signal is greater/lower than the specified Pulse Width.
PGLess/NGLess: you need to specify an upper (refer to :TRIGger:PULSe:UWIDth)

and a lower (refer to :TRIGger:PULSe:LWIDth) pulse width. The oscilloscope triggers
when the positive/negative pulse width of the input signal is greater than the
specified lower pulse width and lower than the upper pulse width.
Return
The query returns PGR, PLES, NGR, NLES, PGL or NGL.
Format
Example :TRIGger:PULSe:WHEN NLESs
Related :TRIGger:PULSe:WIDTh
Commands
:TRIGger:PULSe:UWIDth
:TRIGger:PULSe:LWIDth
2-88
Type Range
Discrete {CHANnel1|CHANnel2|CHANnel3|CHANnel4}
Type Range
Discrete {PGReater|PLESs|NGReater|NLESs|PGLess|NGLess}
/*Set the trigger condition to NLESs*/
/*Set the trigger source to CH1*/
DS1000Z Programming Guide
Chapter 2 Command System
Default
CHANnel1
Default
PGReater