Rigol DS1000Z Series Programming Manual page 129

Chapter 2 Command System
:TRIGger:DELay:TUPPer
Syntax
:TRIGger:DELay:TUPPer <NR3>
:TRIGger:DELay:TUPPer?
Description
Set or query the upper limit of the delay time in delay trigger. The default unit is s.
Parameter
Name
<NR3>
Explanation
This command is only available when the delay type (refer to :TRIGger:DELay:TYPe) is
LESS, GOUT or GLESs.
Return
The query returns the upper limit of the delay time in scientific notation.
Format
Example
:TRIGger:DELay:TUPPer 0.002
:TRIGger:DELay:TUPPer?
Related
:TRIGger:DELay:TYPe
Command
:TRIGger:DELay:TLOWer
Syntax :TRIGger:DELay:TLOWer <NR3>
:TRIGger:DELay:TLOWer?
Description Set or query the lower limit of the delay time in delay trigger. The default unit is s.
Parameter
Name
<NR3>
Explanation This command is only available when the delay type (refer to :TRIGger:DELay:TYPe) is
GREater, GOUT or GLESs.
Return The query returns the lower limit of the delay time in scientific notation.
Format
Example
:TRIGger:DELay:TLOWer 0.002
:TRIGger:DELay:TLOWer?
Related :TRIGger:DELay:TYPe
Commands
:TRIGger:DELay:TUPPer
DS1000Z Programming Guide
Type Range
Real 16ns to 10s
/*Set the upper limit of the delay time to 2ms*/
/*The query returns 2.000000e-03*/
Type Range
Related to the delay type:
Real GREater: 8ns to 10s
GOUT or GLESs: 8ns to 9.99s
/*Set the lower limit of the delay time to 2ms*/
/*The query returns 2.000000e-03*/
RIGOL
Default
2μs
Default
1μs
2-115