Measure:statistic:display; Measure:statistic:mode - Rigol DS1000Z Series Programming Manual

RIGOL

:MEASure:STATistic:DISPlay

Syntax
:MEASure:STATistic:DISPlay <bool>
:MEASure:STATistic:DISPlay?
Description
Enable or disable the statistic function, or query the status of the statistic function.
Parameter
Name
<bool>
Explanation
When the statistic function is enabled, the oscilloscope makes statistic and displays the
statistic results of at most 5 measurement items that are turned on last.
Return The query returns 0 or 1.
Format
Example :MEASure:STATistic:DISPlay ON
Related

:MEASure:STATistic:MODE

Commands
:MEASure:STATistic:RESet
:MEASure:STATistic:ITEM
:MEASure:ITEM
:MEASure:STATistic:MODE
Syntax :MEASure:STATistic:MODE <mode>
:MEASure:STATistic:MODE?
Description
Set or query the statistic mode.
Parameter
Name
<mode>
Explanation DIFFerence: select the difference mode. The statistic results contain the current

value, average value, standard deviation and counts.
EXTRemum: select the extremum mode. The statistic results contain the current

value, average value, minimum and maximum.
Sending the

When the statistic function is enabled, the oscilloscope makes statistic and displays
the statistic results of at most 5 measurement items that are turned on last.
Return The query returns DIFF or EXTR.
Format
Example
:MEASure:STATistic:MODE DIFFerence
:MEASure:STATistic:MODE?
Related
:MEASure:STATistic:DISPlay
Commands
:MEASure:STATistic:RESet
:MEASure:STATistic:ITEM
2-60
Type Range
Bool {{0|OFF}|{1|ON}}
Type Range
Discrete {DIFFerence|EXTRemum}
:MEASure:STATistic:DISPlay
Chapter 2 Command System
command can enable the statistic function.
/*Select the difference mode*/
/*The query returns DIFF*/
DS1000Z Programming Guide
Default
0|OFF
Default
EXTRemum