[:Source[<N>]]:Phase:initiate; [:Source[<N>]]:Function[:Shape] - Rigol DS1000Z Series Programming Manual

Digital oscilloscope
Hide thumbs Also See for DS1000Z Series:
Table of Contents

Advertisement

Chapter 2 Command System
[:SOURce[<n>]]:PHASe:INITiate
Syntax
[:SOURce[<n>]]:PHASe:INITiate
Description
Execute the align phase operation.
Parameter
Name
[<n>]
Explanation
When the align phase operation is performed, the instrument re-configures the two
channels to make them output with the specified frequency and phase.
For two signals whose frequencies are the same or in multiple, this operation will align
their phases. For example, assume Source1 output a 1kHz, 5Vpp, 0° sine waveform and
Source2 outputs a 1kHz, 5Vpp, 180° sine waveform. Sample the two waveforms using
another oscilloscope and display them stably; you will see that the waveforms shown on
the oscilloscope do not always have a phase deviation of 180°. At this point, execute the
align phase operation and the waveforms shown on the oscilloscope will have a phase
deviation of 180° without any manual adjustment of the start phase of the generator.
[:SOURce[<n>]]:FUNCtion[:SHAPe]
Syntax
[:SOURce[<n>]]:FUNCtion[:SHAPe] <wave>
[:SOURce[<n>]]:FUNCtion[:SHAPe]?
Description
Select or query the output waveform when the modulation of the specified source channel
is not enabled. Select or query the carrier waveform when the modulation is enabled. At
this point, if PULSe, NOISe or DC is selected, the modulation will turn off automatically.
Parameter
Name
[<n>]
<wave>
Explanation
Return
The query returns SIN, SQU, RAMP, PULS, NOIS, DC, INTE or EXT.
Format
Example
:FUNCtion SQUare
DS1000Z Programming Guide
Type
Range
Discrete
{1|2}
Before Aligning Phase
Type
Range
Discrete
{1|2}
{SINusoid|SQUare|RAMP|PULSe
Discrete
|NOISe|DC|INTErnal|EXTernal}
INTErnal: built-in waveforms (7 built-in waveforms are provided by DS1000Z,
including Sinc, Exp.Rise, Exp.Fall, ECG, Gauss, Lorentz and Haversine)
EXTernal: arbitrary waveform
RIGOL
Default
If omitted, the operation is
performed on source 1 by
default
After Aligning Phase
Default
If omitted, the operation is
performed on source 1 by
default
SINusoid
2-69

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ds1104zDs1074zDs1104z-sDs1074z-s

Table of Contents