Rigol DS1000Z Series Programming Manual page 128

RIGOL
:TRIGger:DELay:SLOPB
Syntax
:TRIGger:DELay:SLOPB <slope>
:TRIGger:DELay:SLOPB?
Description Set or query the edge type of the trigger source B in delay trigger.
Parameter
Name
<slope>
Return The query returns POS or NEG.
Format
Example
:TRIGger:DELay:SLOPB NEGative
:TRIGger:DELay:TYPe
Syntax
:TRIGger:DELay:TYPe <type>
:TRIGger:DELay:TYPe?
Description Set or query the delay type in delay trigger.
Parameter
Name
<type>
Explanation
GREater: trigger when the time difference (△T) between the specified edges of tigger

source A and tigger source B is greater than the preset time limit.
LESS: trigger when the time difference (△T) between the specified edges of tigger

source A and tigger source B is lower than the preset time limit.
GLESs: trigger when the time difference (△T) between the specified edges of tigger

source A and tigger source B is greater than the lower limit of the preset time and
lower than the upper limit of the preset time. Note that the time lower limit must be
lower than the time upper limit.
GOUT: trigger when the time difference (△T) between the specified edges of tigger

source A and tigger source B is lower than the lower limit of the preset time or
greater than the upper limit of the preset time. Note that the time lower limit must be
lower than the time upper limit.
Return
The query returns GOUT, GRE, LESS or GLES.
Format
Example
:TRIGger:DELay:TYPe GOUT
Related :TRIGger:DELay:TUPPer
Commands
:TRIGger:DELay:TLOWer
2-114
Type Range
Discrete {POSitive|NEGative}
Type Range
Discrete {GREater|LESS|GLESs |GOUT}
Chapter 2 Command System
Default
POSitive
Default
GREater
DS1000Z Programming Guide