Rigol DS1000Z Series Programming Manual page 31

Chapter 2 Command System
:CURSor:MANual:SOURce
Syntax
:CURSor:MANual:SOURce <source>
:CURSor:MANual:SOURce?
Description
Set or query the channel source of the manual cursor measurement mode.
Parameter
Name
<source>
Explanation Only the channel that is enabled currently can be selected.
Return
The query returns CHAN1, CHAN2, CHAN3, CHAN4 or MATH.
Format
Example
:CURSor:MANual:SOURce CHANnel2
:CURSor:MANual:TUNit
Syntax
:CURSor:MANual:TUNit <unit>
:CURSor:MANual:TUNit?
Description
Set or query the horizontal unit in the manual cursor measurement mode.
Parameter
Name
<unit>
Explanation




Return
The query returns S, HZ, DEGR or PERC.
Format
Example
:CURSor:MANual:TUNit DEGRee
:CURSor:MANual:VUNit
Syntax
:CURSor:MANual:VUNit <unit>
:CURSor:MANual:VUNit?
Description
Set or query the vertical unit in the manual cursor measurement mode.
Parameter
Name
<unit>
Explanation


Return
The query returns PERC or SOUR.
Format
Example
:CURSor:MANual:VUNit PERCent
Related :CHANnel<n>:UNITs
Command
DS1000Z Programming Guide
Type
Discrete
Type
Discrete
S: AX, BX and BX-AX in the measurement results are in "s" and 1/|dX| is in "Hz".
HZ: AX, BX and BX-AX in the measurement results are in "Hz" and 1/|dX| is in "s".
DEGRee: AX, BX and BX-AX are in "degree".
PERCent: AX, BX and BX-AX are in "%".
Type
Discrete
PERCent: AY, BY and BY-AY in the measurement results are in "%".
SOURce: the units of AY, BY and BY-AY in the measurement results will be
automatically set to the unit of the current source.
Range
{CHANnel1|CHANnel2|
CHANnel3|CHANnel4|MATH}
/*Set the channel source of the manual cursor
measurement mode to CH2*/
Range
{S|HZ|DEGRee|PERCent}
/*Set the horizontal unit to "degree"*/
Range
{PERCent|SOURce}
/*Set the vertical unit to %*/
RIGOL
Default
CHANnel1
Default
S
Default
SOURce
2-17