Trigger:nedge (Option) - Rigol DS1000Z Series Programming Manual

Chapter 2 Command System

:TRIGger:NEDGe (Option)

Command List:
:TRIGger:NEDGe:SOURce

:TRIGger:NEDGe:SLOPe

:TRIGger:NEDGe:IDLE

:TRIGger:NEDGe:EDGE

:TRIGger:NEDGe:LEVel

:TRIGger:NEDGe:SOURce
Syntax :TRIGger:NEDGe:SOURce <source>
:TRIGger:NEDGe:SOURce?
Description Set or query the trigger source in Nth edge trigger.
Parameter
Name
<source>
Return The query returns CHAN1, CHAN2, CHAN3 or CHAN4.
Format
Example :TRIGger:NEDGe:SOURce CHANnel2
:TRIGger:NEDGe:SLOPe
Syntax
:TRIGger:NEDGe:SLOPe <slope>
:TRIGger:NEDGe:SLOPe?
Description
Set or query the edge type in Nth edge trigger.
Parameter
Name
<slope>
Explanation

the specified trigger level.

the specified trigger level.
Return
The query returns POS or NEG.
Format
Example
:TRIGger:NEDGe:SLOPe NEGative
DS1000Z Programming Guide
Type
Discrete
Type
Discrete
POSitive: trigger on the rising edge of the input signal when the voltage level meets
NEGative: trigger on the falling edge of the input signal when the voltage level meets
Range
{CHANnel1|CHANnel2|CHANnel3|CHANnel4}
Range
{POSitive|NEGative}
RIGOL
Default
CHANnel1
Default
POSitive
2-119