Measure:item - Rigol DS1000Z Series Programming Manual

RIGOL

:MEASure:ITEM

Syntax
:MEASure:ITEM <item>[,<src>[,<src>]]
:MEASure:ITEM? <item>[,<src>[,<src>]]
Description
Measure any waveform parameter of the specified source, or query the measurement
result of any waveform parameter of the specified source.
Parameter Name
<item>
<src>
Explanation

If the parameter to be measured only needs a single source (such as VMAX, VMIN,

VPP, VTOP, VBASe, VAMP, VAVG, VRMS, OVERshoot, MARea, MPARea, PREShoot,
PERiod, FREQuency, RTIMe, FTIMe, PWIDth, NWIDth, PDUTy and NDUTy), you only
need to set one source. If [,<src>[,<src>]] is omitted, the source is the one selected
by the
If the parameter to be measured needs two sources (such as RDELay, FDELay,

RPHase and FPHase), the command needs to include two sources; otherwise, the
command is invalid. If [,<src>[,<src>]] is omitted, the sources are the ones selected
by the
and
Return
The query returns the measurement result in scientific notation.
Format
Example :MEASure:ITEM OVERshoot,CHANnel2
:MEASure:ITEM? OVERshoot,CHANnel2
Related
:MEASure:SOURce
Commands
:MEASure:SETup:DSA
:MEASure:SETup:DSB
:MEASure:SETup:PSA
:MEASure:SETup:PSB
2-62
Type Range
Discrete {VMAX|VMIN|VPP|VTOP|VBASe|VAMP|VAVG|
VRMS|OVERshoot|PREShoot|MARea|MPARea|
PERiod|FREQuency|RTIMe|FTIMe|PWIDth|
NWIDth|PDUTy|NDUTy|RDELay|FDELay|
RPHase|FPHase|}
Discrete {CHANnel1|CHANnel2|CHANnel3|CHANnel4}
[,<src>[,<src>]] sets the source of the parameter to be measured.
:MEASure:SOURce
:MEASure:SETup:DSA
:MEASure:SETup:PSB
command by default.
and :MEASure:SETup:DSB
commands by default.
/*Enable the overshoot measurement of CH2*/
/*The query returns 8.888889e-03*/
Chapter 2 Command System
Default
--
--
or :MEASure:SETup:PSA
DS1000Z Programming Guide