Command Systems
CURSor Commands
CURSor Commands are used to set cursor parameters to measure manually and
automatically and track the waveform data.
CURSor Commands include:
:CURSor:MODE
:CURSor:MANUal:TYPE
:CURSor:MANUal:SOURce
:CURSor:MANUal:CURAX
:CURSor:MANUal:CURAY
:CURSor:MANUal:CURBX
:CURSor:MANUal:CURBY
:CURSor:TRACk:SOURceA
:CURSor:TRACk:SOURceB
:CURSor:TRACk:CURA
:CURSor:TRACk:CURB
We will give detailed introductions for each command in the following parts.
Programming Guide for DS1000B Series
RIGOL
2-109