Rigol DS1000Z Firmware Upgrade Procedure
Hide thumbs Also See for DS1000Z:

Advertisement

DS1000Z Firmware Upgrade Procedure

Date: 12/24/2013
Solution: The DS1000Z may periodically have firmware upgrades. Here is the
procedure for performing the upgrade.
Important
If you choose to perform an upgrade and your unit is damaged, Rigol is not responsible for the
repair or shipping costs. The User assumes all responsibility.
Verify the USB (flash) drive that can be recognized by a Rigol oscilloscope (e.g. DS1102E) as
follows:
• When the oscilloscope is powered up, insert the USB drive into the USB (Host) port
which is located in the front of the oscilloscope.
• When it prompts "USB device install success", it indicates the flash drive is recognized by the
scope, as shown in Figure 1.
Note 1
• Otherwise the USB drive is not compatible with the oscilloscope
.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS1000Z and is the answer not in the manual?

Questions and answers

Summary of Contents for Rigol DS1000Z

  • Page 1 Important If you choose to perform an upgrade and your unit is damaged, Rigol is not responsible for the repair or shipping costs. The User assumes all responsibility. Verify the USB (flash) drive that can be recognized by a Rigol oscilloscope (e.g. DS1102E) as follows: •...
  • Page 2 DS1000Z Upgrade Steps 1. With the help of your computer, decompress the upgrade software (RAR) files and place them in the top directory of the USB drive. 2. Inserts the flash into the USB (Host) port of the oscilloscope, and it will •...
  • Page 3 Headquarters RIGOL TECHNOLOGIES, INC. No.156,Cai He Village, Sha He Town, Chang Ping District, Beijing, 102206 P.R.China Tel:+86-10-80706688 Fax:+86-10-80705070 Email: support@rigol.com RIGOL TECHNOLOGIES,USA INC. 7401 First Place, Suite N Oakwood Village OH 44164, USA Toll free: 877-4-RIGOL-1 Office: (440) 232-4488 Fax: (216)-754-8107 Email: info@rigol.com...

Table of Contents