Measure:statistic:reset; Measure:statistic:item - Rigol DS1000Z Series Programming Manual

Chapter 2 Command System

:MEASure:STATistic:RESet

Syntax
:MEASure:STATistic:RESet
Description Clear the history data and make statistic again.
Related
:MEASure:STATistic:DISPlay
Commands
:MEASure:STATistic:MODE

:MEASure:STATistic:ITEM

:MEASure:STATistic:ITEM
Syntax
:MEASure:STATistic:ITEM <item>[,<src>[,<src>]]
:MEASure:STATistic:ITEM? <type>,<item>[,<src>[,<src>]]
Description
Enable the statistic function of any waveform parameter of the specified source, or query
the statistic result of any waveform parameter of the specified source.
Parameter
Name
<item>
<src>
<type>
Explanation



Return
The query returns the statistic result in scientific notation.
Format
Example
:MEASure:STATistic:ITEM VPP,CHANnel2
:MEASure:STATistic:ITEM? MAXimum,VPP
Related
:MEASure:SOURce
Commands
:MEASure:SETup:DSA
:MEASure:SETup:DSB
:MEASure:SETup:PSA
:MEASure:SETup:PSB
DS1000Z Programming Guide
Type Range
{VMAX|VMIN|VPP|VTOP|VBASe|VAMP|VAVG|
VRMS|OVERshoot|PREShoot|MARea|MPARea|
Discrete PERiod|FREQuency|RTIMe|FTIMe|PWIDth|
NWIDth|PDUTy|NDUTy|RDELay|FDELay|
RPHase|FPHase}
Discrete {CHANnel1|CHANnel2|CHANnel3|CHANnel4}
{MAXimum|MINimum|CURRent|AVERages|
Discrete
DEViation}
[,<src>[,<src>]] sets the source of the parameter to be measured.
If the parameter to be measured only needs a single source (such as VMAX, VMIN,
VPP, VTOP, VBASe, VAMP, VAVG, VRMS, OVERshoot, MARea, MPARea, PREShoot,
PERiod, FREQuency, RTIMe, FTIMe, PWIDth, NWIDth, PDUTy and NDUTy), you only
need to set one source. If [,<src>[,<src>]] is omitted, the source is the one selected
by the :MEASure:SOURce
If the parameter to be measured needs two sources (such as RDELay, FDELay,
RPHase and FPHase), the command needs to include two sources; otherwise, the
command is invalid. If [,<src>[,<src>]] is omitted, the sources are the ones selected
by the :MEASure:SETup:DSA
and :MEASure:SETup:PSB
command by default.
and :MEASure:SETup:DSB
commands by default.
/*Enable the Vpp statistic function of CH2*/
/*The query returns 9.120000e-01*/
RIGOL
Default
--
Refer to
Explanation
--
or :MEASure:SETup:PSA
2-61