Measure:setup:min; Measure:setup:psa - Rigol DS1000Z Series Programming Manual

RIGOL

:MEASure:SETup:MIN

Syntax
:MEASure:SETup:MIN <value>
:MEASure:SETup:MIN?
Description
Set or query the lower limit of the threshold in the time, delay and phase measurements.
The default unit is %.
Parameter Name
<value>
Explanation
The upper limit, middle point and lower limit of the threshold (expressed in %) are

used to define the time, delay and phase parameters. Setting these values will affect
the measurement results of the time, delay and phase parameters.
Setting the lower limit greater than the middle point will automatically increase the

middle point to keep it greater than the upper limit.
Return
The query returns an integer between 5 and 93.
Format
Example :MEASure:SETup:MIN 93
Related :MEASure:SETup:MAX
Commands
:MEASure:SETup:MID
:MEASure:ITEM

:MEASure:SETup:PSA

Syntax :MEASure:SETup:PSA <source>
:MEASure:SETup:PSA?
Description
Set or query source A of the Phase 1→2
Parameter
Name
<source>
Return The query returns CHAN1, CHAN2, CHAN3 or CHAN4.
Format
Example
:MEASure:SETup:PSA CHANnel1
Related :MEASure:ITEM
Command
2-58
Type Range
Integer 5 to 93
Type Range
Discrete {CHANnel1|CHANnel2|CHANnel3|CHANnel4}
Chapter 2 Command System
and Phase 1→2 measurements.
DS1000Z Programming Guide
Default
10
Default
CHANnel1