Measure:setup:max; Measure:setup:mid - Rigol DS1000Z Series Programming Manual

Chapter 2 Command System

:MEASure:SETup:MAX

Syntax
:MEASure:SETup:MAX <value>
:MEASure:SETup:MAX?
Description
Set or query the upper limit of the threshold in the time, delay and phase measurements.
The default unit is %.
Parameter
Name
<value>
Explanation


Return
The query returns an integer between 7 and 95.
Format
Example :MEASure:SETup:MAX 95
Related

:MEASure:SETup:MID

Commands
:MEASure:SETup:MIN
:MEASure:ITEM
:MEASure:SETup:MID
Syntax
:MEASure:SETup:MID <value>
:MEASure:SETup:MID?
Description
Set or query the middle point of the threshold in the time, delay and phase
measurements. The default unit is %.
Parameter
Name
<value>
Explanation


Return
The query returns an integer between 6 and 94.
Format
Example
:MEASure:SETup:MID 89
Related :MEASure:SETup:MAX
Commands
:MEASure:SETup:MIN
:MEASure:ITEM
DS1000Z Programming Guide
Type Range
Integer 7 to 95
The upper limit, middle point and lower limit of the threshold (expressed in %) are
used to define the time, delay and phase parameters. Setting these values will affect
the measurement results of the time, delay and phase parameters.
Setting the upper limit lower than the middle point will automatically reduce the
middle point to keep it lower than the upper limit.
Type Range
Integer 6 to 94
The upper limit, middle point and lower limit of the threshold (expressed in %) are
used to define the time, delay and phase parameters. Setting these values will affect
the measurement results of the time, delay and phase parameters.
The middle point must be lower than the upper limit and greater than the lower limit.
RIGOL
Default
90
Default
50
2-57