Page 1
Rack Mount Kit MSO1000Z/DS1000Z/DG4000 The PH2 Phillips screwdriver is recommended. This rack mount kit is designed to mount RIGOL MSO1000Z/DS1000Z series digital oscilloscope or DG4000 series function/arbitrary waveform generator into a 19-inch Space Requirements machine cabinet that conforms to the Electronic Industries Association (EIA) standard. This manual takes DG4000 as an example to introduce the installation method.
Page 2
Installation Guide Installation Guide RIGOL RIGOL Installation Procedures Fasten the upper part of the instrument CAUTION Fasten the upper part of the instrument with two fasteners, Only authorized operators are allowed to perform the installation. Improper installation might cause damage to the instrument or an installation failure.
Need help?
Do you have a question about the MSO1000Z Series and is the answer not in the manual?
Questions and answers