Chapter 2 Command System
:TRIGger:SLOPe:BLEVel
Syntax
:TRIGger:SLOPe:BLEVel <level>
:TRIGger:SLOPe:BLEVel?
Description
Set or query the lower limit of the trigger level in slope trigger. The unit is the same as the
current amplitude unit.
Parameter
Name
<level>
Explanation
For VerticalScale, refer to :CHANnel<n>:SCALe. For OFFSet, refer
to :CHANnel<n>:OFFSet.
Return
The query returns the lower limit of the trigger level in scientific notation.
Format
Example
:TRIGger:SLOPe:BLEVel 0.16
:TRIGger:SLOPe:BLEVel
Related
:CHANnel<n>:SCALe
Commands
:CHANnel<n>:OFFSet
:TRIGger:SLOPe:ALEVel
DS1000Z Programming Guide
Type
Range
Real
(± 5 × VerticalScale from the screen center) - OFFSet
/*Set the lower limit of the trigger level to 160mV*/
/*The query returns 1.600000e-01*/
RIGOL
Default
0
2-95