Waveform:xincrement; Waveform:xorigin; Waveform:xreference - Rigol DS1000Z Series Programming Manual

Chapter 2 Command System

:WAVeform:XINCrement?

Syntax
:WAVeform:XINCrement?
Description Query the time difference between two neighboring points of the specified channel source
in the X direction.
Explanation


Return
The query returns the XINCrement in scientific notation.
Format
Example
:WAVeform:XINCrement?
Related
:WAVeform:SOURce
Command

:WAVeform:XORigin?

Syntax
:WAVeform:XORigin?
Description
Query the time from the trigger point to the reference time of the specified channel
source in the X direction.
Explanation The unit is related to the current channel source:
when the channel source is one from CHANnel1 to CHANnel4, the unit is s;
when the channel source is MATH and the operation type is FFT, the unit is Hz.
Return The query returns the XORigin in scientific notation.
Format
Example :WAVeform:XORigin?
Related
:WAVeform:SOURce
Commands

:WAVeform:XREFerence?

:WAVeform:XREFerence?
Syntax
:WAVeform:XREFerence?
Description
Query the reference time of the specified channel source in the X direction
Return
The query returns 0 (namely the first point on the screen or in the internal memory).
Format
Related :WAVeform:SOURce
Command
DS1000Z Programming Guide
The returned value is related to the current data reading mode:
In the NORMal mode, XINCrement = TimeScale/100;
In the RAW mode, XINCrement = 1/SampleRate
The unit is related to the current channel source:
when the channel source is one from CHANnel1 to CHANnel4, the unit is s;
when the channel source is MATH and the operation type is FFT, the unit is Hz.
/*The query returns -6.000000e-06*/
/*The query returns 1.000000e-08*/
RIGOL
2-137