RIGOL
:TIMebase[:MAIN]:SCALe
Syntax
:TIMebase[:MAIN]:SCALe <scale_value>
:TIMebase[:MAIN]:SCALe?
Description
Set or query the main timebase scale. The default unit is s/div.
Parameter
Name
<scale_value>
Explanation
When the horizontal timebase mode is YT and the horizontal timebase is 20ms or
larger (namely the "Slow Sweep" mode), this command is invalid when the
oscilloscope in the Stoping state.
Return Format
The query returns the main timebase scale in scientific notation.
Example
:TIMebase:MAIN:SCALe 0.0002
:TIMebase:MAIN:SCALe?
Related
:TIMebase:MODE
Command
:TIMebase:MODE
Syntax
:TIMebase:MODE <mode>
:TIMebase:MODE?
Description
Set or query the mode of the horizontal timebase.
Parameter
Return Format
The query returns MAIN, XY or ROLL.
Example
:TIMebase:MODE XY
Related
:TIMebase:DELay:OFFSet
Commands
:TIMebase:DELay:SCALe
:TIMebase[:MAIN]:OFFSet
:TIMebase[:MAIN]:SCALe
2-82
Type
Real
Name
Type
<mode>
Discrete
Range
Normal: 5ns to 50s in 1-2-5 step
Roll: 200ms to 50s in 1-2-5 step
/*Set the main timebase scale to 200μs*/
/*The query returns 2.0000000e-04*/
Range
{MAIN|XY|ROLL}
Chapter 2 Command System
Default
1μs
Default
MAIN
DS1000Z Programming Guide