Table of Contents
Advertisement
10.2.4
10.3
1.888.610.7664
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
•
Click or tap the icon
label to unfold the statistics result to display all the measurement statistics items.
Click or tap the
Remove the Measurement Results
This oscilloscope allows you to delete the measurement results of the parameters.
•
In Measure setting menu, click or tap Remove to delete the currently selected
measurement item that you've added; click or tap Remove All to delete all the
displayed measurement items.
•
Click or tap any measurement item in the "Result" sidebar at the right side of the
screen and a window is displayed. Click or tap Remove to delete the currently
selected measurement item that you've added; click or tap Remove All to delete
all the displayed measurement items.
•
In the "Result" sidebar, select a measurement item and drag it to the right to
delete it quickly.
Cursor Measurements
Cursor measurement can measure the X axis values (e.g. Time) and Y axis values (e.g.
Voltage) of the selected waveform. Before making cursor measurements, connect the
signal to the oscilloscope to acquire stable display. The cursor measurement function
provides the following two cursors.
•
X Cursor
X cursor is a vertical solid/dotted line that is used to make horizontal
adjustments. It can be used to measure time (s) and frequency (Hz).
www.calcert.com
15
10
20
5
25
0
30
at the lower-right corner of the measurement statistics
icon to fold the measurement statistics label.
Figure 10.8 Cursors
Measurements
sales@calcert.com
DHO1000 User Guide
Advertisement
Table of Contents
