[:Source[<N>]]:Output[<N>][:State]; [:Source[<N>]]:Output[<N>]:Impedance - Rigol DS1000Z Series Programming Manual

Chapter 2 Command System
[:SOURce[<n>]]:OUTPut[<n>][:STATe]
Syntax
[:SOURce[<n>]]:OUTPut[<n>][:STATe] <bool>
[:SOURce[<n>]]:OUTPut[<n>][:STATe]?
Description
Turn on or off the output of the specified source channel, or query the status of the output
of the specified source channel.
Parameter
Name
[<n>]
<bool>
Explanation [:SOURce[<n>]] and [<n>] are used to specify the source channel. The former enjoys
higher priority over the latter, namely if [:SOURce[<n>]] is omitted, the channel is
specified by [<n>] and if [:SOURce[<n>]] is not omitted, the channel is specified by
[:SOURce[<n>]]. If both are omitted, the operation is performed on source 1 by default.
Return
The query returns OFF or ON.
Format
Example
:OUTPut 1
[:SOURce[<n>]]:OUTPut[<n>]:IMPedance
Syntax [:SOURce[<n>]]:OUTPut[<n>]:IMPedance <impedance>
[:SOURce[<n>]]:OUTPut[<n>]:IMPedance?
Description Set or query the impedance of the specified source channel.
Parameter
Name
[<n>]
<impedance>
Explanation
OMEG: high impedance; FIFTy: 50Ω

[:SOURce[<n>]] and [<n>] are used to specify the source channel. The former

enjoys higher priority over the latter, namely if [:SOURce[<n>]] is omitted, the
channel is specified by [<n>] and if [:SOURce[<n>]] is not omitted, the channel is
specified by [:SOURce[<n>]]. If both are omitted, the operation is performed on
source 1 by default.
Return The query returns OMEG or FIFT.
Format
Example :OUTPut:IMPedance FIFTy
DS1000Z Programming Guide
Type Range
Discrete {1|2}
Bool {{0|OFF}|{1|ON}}
Type Range
Discrete {1|2}
Discrete {OMEG|FIFTy}
RIGOL
Default
If omitted, the operation is
performed on source 1 by
default
0|OFF
Default
If omitted, the operation is
performed on source 1 by
default
OMEG
2-67