Rigol DS1000Z Series Programming Manual page 112

RIGOL
:TRIGger:VIDeo:STANdard
Syntax
:TRIGger:VIDeo:STANdard <standard>
:TRIGger:VIDeo:STANdard?
Description Set or query the video standard in video trigger.
Parameter
Name
<standard>
Explanation PALSecam:

PAL: the frame frequency is 25 frames per second. The TV sweep line is 625 with the
odd field goes first and the even field follows behind.
Secam: the frame frequency is 25 frames per second. The sweep line is 625 with
interlacing sweep.
NTSC: the field frequency is 60 fields per second and the frame frequency is 30

frames per second. The TV sweep line is 525 with the even field goes first and the
odd field follows behind.
480P: the frame frequency is 60 frames per second; the TV sweep line is 525;

line-by-line sweep; the line frequency is 31.5 kHz.
576P: the frame frequency is 60 frames per second; the TV sweep line is 625;

line-by-line sweep.
Return The query returns PALS, NTSC, 480P or 576P.
Format
Example
:TRIGger:VIDeo:STANdard NTSC
Related
:TRIGger:VIDeo:LINE
Commands
:TRIGger:VIDeo:MODE
:TRIGger:VIDeo:LEVel
Syntax :TRIGger:VIDeo:LEVel <level>
:TRIGger:VIDeo:LEVel?
Description
Set or query the trigger level in video trigger. The unit is the same as the current
amplitude unit.
Parameter
Name
<level>
Explanation
For VerticalScale, refer to :CHANnel<n>:SCALe.

For OFFSet, refer to :CHANnel<n>:OFFSet.

Return The query returns the trigger level in scientific notation.
Format
Example
:TRIGger:VIDeo:LEVel 0.16
:TRIGger:VIDeo:LEVel
Related
:CHANnel<n>:SCALe
Commands
:CHANnel<n>:OFFSet
2-98
Type Range
Discrete {PALSecam|NTSC|480P|576P}
Type Range
Real (± 5 × VerticalScale from the screen center) - OFFSet
/*Set the trigger level to 160mV*/
/*The query returns 1.600000e-01*/
Chapter 2 Command System
Default
NTSC
Default
0
DS1000Z Programming Guide