RIGOL
Cursor Commands
Cursor Commands are used to set cursor parameters to measure manually and
automatically and track the waveform data.
Cursor Commands include:
:CURSor:MODE
:CURSor:MANUal:TYPE
:CURSor:MANUal:SOURce
:CURSor:MANUal:CURAX
:CURSor:MANUal:CURAY
:CURSor:MANUal:CURBX
:CURSor:MANUal:CURBY
:CURSor:TRACk:SOURceA
:CURSor:TRACk:SOURceB
:CURSor:TRACk:CURA
:CURSor:TRACk:CURB
2-102
Programming Guide for DS1000B Series