Trigger:rs232 (Option) - Rigol DS1000Z Series Programming Manual

Chapter 2 Command System

:TRIGger:RS232 (Option)

Command List:
:TRIGger:RS232:SOURce

:TRIGger:RS232:WHEN

:TRIGger:RS232:PARity

:TRIGger:RS232:STOP

:TRIGger:RS232:DATA

:TRIGger:RS232:WIDTh

:TRIGger:RS232:BAUD

:TRIGger:RS232:BUSer

:TRIGger:RS232:LEVel

:TRIGger:RS232:SOURce
Syntax :TRIGger:RS232:SOURce <source>
:TRIGger:RS232:SOURce?
Description Set or query the trigger source in RS232 trigger.
Parameter
Name
<source>
Return Format
The query returns CHAN1, CHAN2, CHAN3 or CHAN4.
Example
:TRIGger:RS232:SOURce CHANnel2
:TRIGger:RS232:WHEN
Syntax
:TRIGger:RS232:WHEN <when>
:TRIGger:RS232:WHEN?
Description
Set or query the trigger condition in RS232 trigger.
Parameter
Name
<when>
Explanation




Return Format The query returns STAR, ERR, PAR or DATA.
Example
:TRIGger:RS232:WHEN ERRor
Related :TRIGger:RS232:DATA
Command
DS1000Z Programming Guide
Type Range
Discrete {CHANnel1|CHANnel2|CHANnel3|CHANnel4}
Type Range
Discrete {STARt|ERRor|PARity|DATA}
STARt: trigger on the start frame position.
ERRor: trigger when error frame is detected.
PARity: trigger when check error is detected.
DATA: trigger on the last bit of the preset data bits and even-odd check bits.
RIGOL
Default
CHANnel1
Default
STARt
2-121