Measure:clear; Measure:recover - Rigol DS1000Z Series Programming Manual

Chapter 2 Command System

:MEASure:CLEar

Syntax
:MEASure:CLEar <item>
Description Clear one or all of the last five measurement items enabled.
Parameter
Name
<item>
Explanation

24 waveform parameters. Note that the last five parameters are determined
according to the order in which you turned them on and they will not change as you
delete one or more measurement items.

cleared.
Example :MEASure:CLEar ITEM1
Related

:MEASure:RECover

Commands
:MEASure:ITEM
:MEASure:RECover
Syntax
:MEASure:RECover <item>
Description Recover the measurement item which has been cleared.
Parameter
Name
<item>
Explanation

24 waveform parameters. Note that the last five parameters are determined
according to the order in which you turned them on and they will not change as you
delete one or more measurement items.

of the measurement items are recovered.
Related
:MEASure:CLEar
Commands
:MEASure:ITEM
DS1000Z Programming Guide
Type Range
{ITEM1|ITEM2|ITEM3|ITEM4|ITEM5|ALL}
Discrete
You can use the :MEASure:ITEM
You can send the :MEASure:RECover
Type Range
Discrete {ITEM1|ITEM2|ITEM3|ITEM4|ITEM5|ALL}
You can use the :MEASure:ITEM
You can send the :MEASure:CLEar
command to enable the desired parameters of the
command to recover the item which has been
command to enable the desired parameters of the
command to clear the items again after one or all
RIGOL
Default
--
Default
--
2-55