Changing Data; Changing A Text Value; Changing A Data Value; Infinitely Variable Change Of Numeric Data Value - Danfoss VLT AutomationDrive FC 301 Programming Manual

How to Program
After selecting a parameter group, select a parameter with
the navigation keys.
2 2 The middle section on the display shows the parameter
number and name, and the selected parameter value.
Illustration 2.15 Parameter Selection

2.1.10 Changing Data

The procedure for changing data is the same in the quick
menu mode and the main menu mode. Press [OK] to
change the selected parameter.
The procedure for changing data depends on whether the
selected parameter represents a numeric data value or a
text value.

2.1.11 Changing a Text Value

If the selected parameter is a text value, change the text
value with the [
Place the cursor on the value to save and press [OK].
Illustration 2.16 Changing a Text Value
24
VLT
740RPM 10.64A
Basic Settings
0 -01 Language
[0] English
▲ ▼
] [ ] keys.
740RPM 10.64 A
Basic Settings
0 -01 Language
[0] English
Danfoss A/S © 02/2016 All rights reserved.
®
AutomationDrive FC 301/302

2.1.12 Changing a Data Value

If the selected parameter shows a numeric data value,
change the selected data value with the [
keys and the [
move the cursor horizontally.
1 [1]
0-0 *
Illustration 2.17 Changing a Data Value
▲ ▼
Press [ ] [
the data value, and [
cursor on the value to save and press [OK].
Illustration 2.18 Saving a Data Value
1 [1]
0-0 * 2.1.13 Infinitely Variable Change of
Numeric Data Value
If the selected parameter shows a numeric data value,
select a digit with [
Illustration 2.19 Selecting a Digit
▲ ▼
] [ ] navigation keys. Press [
113 RPM 1.78 A
Load depen. setting
1 - 60 Low speed load
compensation
100%
] keys to change the data value. [
▼
] decreases the data value. Place the
729RPM 6.21A
Load depen. setting
1 - 60 Low speed load
compensation
6
1 0%
◀ ▶
] [ ].
635 RPM 0.44 A
Start Adjustments
1 - 71 Start Delay
00.0s
◀ ▶
] [ ] navigation
◀ ▶
] [ ] keys to
1(1)
1- 6*
▲
] increases
1(1)
1- 6*
1 (1)
1- 7*
MG33ML02