Danfoss VLT AutomationDrive FC 301 Programming Manual page 193

Parameter Descriptions
35-44 Term. X48/2 Low Ref./Feedb. Value
Range: Function:
0 [-999999.999 - Enter the reference or feedback value (in
*
999999.999] RPM, Hz, bar, and so on) that corresponds
to the voltage or current set in
parameter 35-42 Term. X48/2 Low Current.
35-45 Term. X48/2 High Ref./Feedb. Value
Range: Function:
100 [-999999.999 - Enter the reference or feedback value
*
999999.999] (in RPM, Hz, bar, and so on) that
corresponds to the voltage or current
set in parameter 35-43 Term. X48/2 High
Current.
35-46 Term. X48/2 Filter Time Constant
Range: Function:
0.001 s [0.001 - 10 Enter the filter time constant. This is a
*
s] first-order digital low-pass filter time
constant for suppressing electrical noise
in terminal X48/2. A high time constant
value improves dampening but also
increases the time delay through the
filter.
MG33ML02
Programming Guide
Danfoss A/S © 02/2016 All rights reserved.
3 3
191