How To Program; The Graphical And Numerical Local Control Panels - Danfoss VLT AutomationDrive FC 301 Programming Manual

How to Program

2 How to Program
2 2
2.1 The Graphical and Numerical Local
Control Panels
Easy programming of the frequency converter is performed
by the graphical LCP (LCP 102). Consult the frequency
converter design guide, when using the numeric local
control panel (LCP 101).
The LCP is divided into 4 functional groups:
1. Graphical display with status lines.
2. Menu keys and indicator lights - changing
parameters and switching between display
functions.
3. Navigation keys and indicator lights.
4. Operation keys and indicator lights.
The LCP display can show up to 5 items of operating data
while showing Status.
Display lines:
a. Status line: Status messages showing icons and
graphics.
b. Line 1–2: Operator data lines showing data
defined or selected. Add up to 1 extra line by
pressing [Status].
c. Status line: Status messages showing text.
NOTICE
If start-up is delayed, the LCP shows the INITIALIZiNG
message until it is ready. Adding or removing options
may delay the start-up.
16
®
VLT AutomationDrive FC 301/302
1
2
3
4
Illustration 2.1 LCP
Danfoss A/S © 02/2016 All rights reserved.
Status
1234rpm 10,4A
43,5Hz
Run OK
Quick Main
Status
Menu Menu
OK
On
Warn.
Alarm
Hand Auto
O
on on
a
1(0)
43,5Hz
b
c
Alarm
Log
Reset
MG33ML02