Parameter Lists; Parameter Lists And Options; Introduction - Danfoss VLT AutomationDrive FC 301 Programming Manual

Parameter Lists

4 Parameter Lists

4.1 Parameter Lists and Options

4.1.1 Introduction

Frequency converter series
All = valid for FC 301 and FC 302 series
01 = valid for FC 301 only
02 = valid for FC 302 only
Changes during operation
True means that the parameter can be changed while the
frequency converter is in operation. False means that the
frequency converter must be stopped before a change can
be made.
4 Set-up
All set-ups: the parameter can be set individually in each
of the 4 set-ups, for example, 1 single parameter can have
4 different data values.
1 set-up: The data value is the same in all set-ups.
Data Description
type
2 Integer 8
3 Integer 16
4 Integer 32
5 Unsigned 8
6 Unsigned 16
7 Unsigned 32
9 Visible string
33 Normalised value 2 bytes
35 Bit sequence of 16 boolean variables
54 Time difference w/o date
Table 4.1 Data Type
MG33ML02
Programming Guide
Type
Int8
Int16
Int32
Uint8
Uint16
Uint32
VisStr
N2
V2
TimD
Danfoss A/S © 02/2016 All rights reserved.
4 4
195