Setting The Date And Time - Covidien Nellcor OxiMax N-600x Operator's Manual

Setting the Date and Time

N-600x Operator's Manual
1. With the monitor in the normal monitoring mode, press the
ALARM SILENCE button until the alarm volume level displays
and sounds on the monitor.
2. While continuing to press the ALARM SILENCE button, press
and hold the ADJUST UP or ADJUST DOWN button to
increase or decrease the volume.
WARNING: The sensor extrapolates from the date and time
provided by the N-600x when recording the sensor event
record to the sensor. The accuracy of the date/time is the
responsibility of the N-600x. It is recommended that the
N-600x user set the time/date to the correct value before a
sensor event record-enabled sensor is connected, and that
this date/time not be changed while the sensor remains
connected. Since a sensor with sensor event record data
can be transported from one monitor to another, having
discrepancies in the date/time between monitors and the
sensor event record data will affect the order the sensor
event record data appears. To eliminate this possible
problem, all monitors within an institution should be set to
the same time.
1. With the monitor in the normal monitoring mode, press the
SETUP softkey.
Using the Monitor
55