About The Controls - Covidien Nellcor OxiMax N-600x Operator's Manual

Symbols, Controls, Displays and Indicators

About the Controls

10
ON/STANDBY Button
Turns the monitor on and off.
Note: Pressing a button, except the ON/STANDBY button, should
result in either a valid or an invalid key tone (refer to Table 3). If
the key pressed fails to emit a tone, contact qualified service
personnel.
ALARM SILENCE Button
Silences current alarms for the alarm silence duration period.
When an alarm has been silenced, pressing the button again
reactivates, or "unsilences" the alarm. It is also used to view and
adjust alarm silence duration and alarm volume. The ALARM
SILENCE button clears "SENSOR OFF," "LOW BATTERY," and
"SENSOR DISCONNECT" messages from the display.
ADJUST UP Button
Increases variable parameters of the monitor.
ADJUST DOWN Button
Decreases variable parameters in the monitor.
HELP/CONTRAST Button
Enables you to access the on-screen help and adjust the monitor
screen contrast.
• Pressing and releasing the HELP/CONTRAST button
launches the on-screen help.
N-600x Operator's Manual