Printing Monitor Trend Data
Overview
Printing
N-600x Operator's Manual
Trend information (monitor and in-sensor event history) can be
sent to a personal computer or to a serial printer.
Note: The protocol settings must be set to ASCII MODE for
printing text data or GRAPH MODE for printing graphical data.
1. With the monitor in the normal monitoring mode, connect
the serial printer to the monitor's Data port connector, using
Nellcor printer cable part number 036341.
2. Turn on the printer.
3. Press the SETUP softkey on the monitor, and then press the
NEXT softkey.
Printing Monitor Trend Data
93