Date, Time, And Patient Identifier Settings; Date - Covidien INVOS 5100C Operator's Manual

Operation
Clinical study mode:
AUC and database
mode:
Diagnostic mode:

Note:
STS database users, see Chapter

Date, Time, and Patient Identifier Settings

6.4
This section provides instructions for changing the date and time settings, and adding a patient
identifier.

Note:
The date and time may only be changed from the Start screen prior to entering Run function.

Note:
A type-matic (repeat) function is active for navigation key menus that are repetitive (for example, Next). It
allows the operator to navigate faster through the options by pressing and holding the Menu key.

Date

6.4.1
After the INVOS™ system is turned ON
DATE:
Day
NEW PATIENT
DATE
DAY
DAY = XX
Use the INCREASE or DECREASE options to adjust and change the day as necessary. Press PRE-
VIOUS MENU again to return to the Start screen.
6-2
The Clinical study mode (also known as Control mode) is for investigational use only.
Contact Covidien customer service for additional information regarding Clinical study mode.
The AUC and database mode is for patient monitoring, and collecting and downloading cere-
bral oximetry metrics for submission to the STS adult cardiac surgery database (see Chapter
Database Operational Mode and Area Under the
The Diagnostic mode is for technical service. Contact Covidien customer service for more infor-
mation regarding this mode.
8 Database Operational Mode and Area Under the
, perform the following menu options to change the
PREVIOUS PATIENT
TIME
MONTH
INCREASE
Curve).
DATE/TIME NEXT MENU
PREVIOUS MENU
YEAR PREVIOUS MENU
DECREASE PREVIOUS MENU
8
Curve.
Operator's Manual