Oximax Sensor Event Record Not Available - Covidien Nellcor OxiMax N-600x Operator's Manual

Using OXIMAX Sensor Event Records
O M Sensor Event Record Not Available
XI AX
86
A corresponding "DATA IN SENSOR" message is also displayed at
the bottom of the display. After 4 to 6 seconds, if all the data has
been read from the O
XI
the main menu.
If data is still being read from the O
6 seconds, the DATA IN SENSOR message is replaced with a
READING TRENDS message which includes an ABORT option.
Selecting the ABORT softkey stops the recording, accessing or
viewing of additional data into the O
Sensor event records can be viewed by accessing the TREND/
SENSOR menu.
The SENSOR EVENT RECORD LED comes on steady when O
sensor memory is full and stays on until the O
disconnected.
If you select the TREND/SENSOR option when a connected
O M sensor (single-patient-use O
XI AX
contain data, because no events were recorded to the O
M sensor, the message is replaced with
AX
M sensor after 4 to
XI AX
M sensor.
XI AX
XI
M sensors only) does not
XI AX
N-600x Operator's Manual
M
XI AX
M sensor is
AX
M
XI AX