Setting Up Oximax Sensor Messages - Covidien Nellcor OxiMax N-600x Operator's Manual

Using OXIMAX Sensor Event Records
Setting up O M
XI
82
maximum number of events that can be stored in an O
sensor is typically 100.
Event records can only be viewed after an O
containing patient alarm data (event records) has been connected
to an O M monitor with SENSOR enabled. Event records are
XI AX
designed to view patient events from prior areas of care or
transport (history) while monitor trend should be used to view
data or events from a patient currently being monitored.
The monitor's SENSOR EVENT RECORD indicator lights when an
O M sensor containing event data is connected to the O
XI AX
monitor.
Patient alarm event data is accessed by pressing the TREND
softkey on the main menu and selecting the SENSOR softkey
option. Sensor event record can be viewed in graphical form
(GRAPH) or in a summary table (TABLE).
Note: Once the O M
XI AX
O M sensor and event data is stored in the O
XI AX
O M sensor event record type cannot be reset. The monitor's
XI AX
type set up can be changed at any time.
Recording and viewing of O
available on O M compatible monitors with SENSOR enabled.
XI AX
The O M sensors may function on older technology monitors
XI AX
but the O M sensor event record feature is not available.
XI AX
Refer to the N-600x Service Manual for specific instruction on
how to disable the storage of the sensor event recorded in an
O M sensor.
XI AX
Sensor Messages
AX
The O M sensor message setup display allows you to enable or
XI AX
disable the O M sensor message feature. When disabled,
XI AX
neither the "SENSOR NOT POSTING" nor the "RECOMMENDED
ACTION" messages display.
M
XI
sensor event record type is setup in the
M sensor event record is only
XI AX
N-600x Operator's Manual
M
XI AX
sensor
AX
M
XI AX
M sensor, the
XI AX