Plethysmographic (Pleth) Display; Blip Display; Real-Time Trend Display - Covidien Nellcor OxiMax N-600x Operator's Manual

General Introduction

Plethysmographic (Pleth) Display

Use this display view for visual monitoring information in waveform. The
plethysmographic (pleth) display includes a "wiper bar" plethysmographic
waveform, menu bar, and current measured SpO
limit settings. It also includes a battery fuel gauge if running on battery power.
Plethysmographic waveforms with peak to peak amplitudes less than ten pulse
amplitude units (PAUs) are associated to one another. If enabled, SatSeconds and
SPD icons display. For more information, reference Managing the View Display, page
33.

Blip Display

Use this display view for visual monitoring information in blip bar form. The blip
display includes a pulse amplitude blip bar, current measured SpO
current upper and lower SpO
gauge if running on battery power. If enabled, SatSeconds and SPD icons display. For
more information, reference Managing the View Display, page 33.

Real-Time Trend Display

Use this display view for visual monitoring information related to real-time trends.
The trend data plots are automatically updated as the oximeter calculates each new
trend point, where the interval between calculations is based on the display time
18
Figure 9. Pleth Display View
Figure 10. Blip Display View
and pulse rate limits. It also includes a battery fuel
2
Figure 11. Real-time Trend Display View
and pulse rate, upper and lower
2
and pulse rate,
2
Operator's Manual