Covidien Nellcor OxiMax N-600x Operator's Manual page 92

Using OXIMAX Sensor Event Records
84
2. Press the SENSOR softkey.
3. Press the DATA softkey.
Note: O M sensor data type settings are displayed on the
XI AX
monitor as shown in the figure below (in-sensor data type). If no
sensor is connected, both sensor types and the full set of options
for each are displayed. If a sensor is connected, only the sensor
data type for that sensor displays.
Note: The SENSOR-R feature supports all the current O
sensors. The SENSOR-RW feature is only applicable to O
sensors with a read/write chip installed.
4. Use the SELECT softkey to toggle between SENSOR-R and
SENSOR-RW.
5. Use the ADJUST UP or ADJUST DOWN button to select the
O M sensor data type. SENSOR-R and SENSOR-RW
XI AX
selections are:
• SpO
2
• SpO +BPM
2
• DEFAULT
M
XI AX
M
XI AX
N-600x Operator's Manual