Using the Monitor
Adjusting the Screen Contrast
Adjusting the Backlight Brightness
Selecting the Pleth View
50
•
pressing the ALARM SILENCE button
•
any alarm
1. With the monitor in the normal monitoring mode, press and
hold the HELP/CONTRAST button while pressing the ADJUST
UP or ADJUST DOWN button until the desired contrast is
obtained.
2. Press the HELP/CONTRAST button to return to the normal
monitoring mode.
1. With the monitor in the normal monitoring mode, press the
LIGHT softkey.
2. Press the ADJUST UP or ADJUST DOWN button until the
desired backlight brightness is obtained.
The pleth view displays the pleth waveform, %SpO
rate data. Refer to Principles of Operation on page 161, for a
description of the pleth waveform.
1. With the monitor in the normal monitoring mode, press the
SETUP softkey.
, and pulse
2
N-600x Operator's Manual