Pulse Amplitude Trend Data Display - Covidien Nellcor OxiMax N-600x Operator's Manual

Pulse Amplitude Trend Data Display

N-600x Operator's Manual
on the display. Refer to OXIMAX Sensor Type on page 71, to set
up the desired trend data scale. Pulse amplitude cannot be
displayed on the histogram display.
1. With the monitor in the normal monitoring mode, press the
TREND softkey.
2. Press the MONITR softkey.
3. Press the VIEW softkey.
4. Press the NEXT softkey.
5. Press the HIST softkey. The histogram trend data displays.
The pulse amplitude trend data display shows the amplitude of
the patient's pulse rate over the period of time indicated on the
display. Refer to OXIMAX Sensor Type on page 71 to setup the
desired trend data scale.
1. With the monitor in the normal monitoring mode, press the
TREND softkey.
2. Press the MONITR softkey.
Using Monitor Trend Data
77