Blip Display - Covidien Nellcor OxiMax N-600x Operator's Manual

Symbols, Controls, Displays and Indicators

Blip Display

12
When the monitor is powered by the internal battery, the pleth
display includes a horizontal battery fuel gauge positioned in the
upper left corner which shows the remaining charge (operating
hours) on the battery. If a monitor reporting low battery is
connected to an AC power source, the battery fuel gauge
displays the charging progress. The battery fuel gauge is cleared
from the display once the monitor can provide at least 15 minutes
of operating time.
The blip display includes a pulse amplitude blip bar, current
measured %SpO and pulse rate, and current upper and lower
2
%SpO and pulse rate limits. If SatSeconds are enabled, the blip
2
display includes the SatSeconds indicator and SatSeconds setting.
Decimal points after the %SpO
respective limits have been changed from the power-on defaults.
When the monitor is powered by internal battery, the blip display
includes a horizontal battery fuel gauge positioned in the upper
left corner that shows the remaining charge (operating hours) on
battery. If a monitor reporting a low battery is connected to AC
power, the battery fuel gauge shows the charging progress. The
battery fuel gauge is cleared from the display once the monitor
can provide at least 15 minutes of operating time on battery.
or pulse rate indicate that the
2
N-600x Operator's Manual