Covidien Nellcor OxiMax N-600x Operator's Manual page 96

Using OXIMAX Sensor Event Records
88
• O M sensor is disconnected
XI AX
• O M sensor is removed from the patient
XI AX
The graph title shows the data type (EVENT GRAPH) in the upper
left corner. The number of the displayed event and the total
number of events recorded in the O
the right of the title (example, 2/2). The date and time of the
displayed event are shown in the upper center and upper right
corner.
The type of data displayed in the graph is indicated to the left of
the vertical axis (%SpO
max.) during the event. The duration of the event is shown below
the range value. The vertical axis of the graph is labeled to show
the magnitude scale of the graphed data. The horizontal axis is
not labeled but automatically scales to accommodate the number
of 30-second intervals during the event. The alarm threshold
(lower than %SpO alarm limit) is represented by a horizontal
2
dotted line across the graph. The first data point is the alarm
threshold.
Events are displayed one at a time and one per graph. Graphs are
displayed in chronological sequence, with the most recent event
shown first when accessing the graphical O
display. The user can move between events by using the two
left-most softkeys which are labeled with left- and right-facing
arrow icons, respectively. At the beginning of an event sequence,
event 1 of 2 events, the left-arrow softkey is blank; at the end of
a sequence, event 2 of 2 events, the right-arrow softkey is blank.
The ADJUST UP and ADJUST DOWN buttons on the monitor
panel can also be used to move through events.
M sensor are shown to
XI AX
). Below this is the range of values (min./
2
M
XI
N-600x Operator's Manual
sensor event
AX